VTWFA-3

VTWFA-3
Part Number:VTWFA-3
Dimension:13*112mm
Connectors: SMA
Gain:3dBi
Frequency:2400 MHz

1. Dimension(Unit:mm)
-3

 2. Electrical Characteristics
 2.1  Dielectric Antenna
                       Form 1

  No.

Item

Specifications

Post Environmental Tolerance

1

Frequency(MHz)

2400 MHz

2

Band Width(MHz)

±100 MHz

3

V.S.W.R(in BW)

≤1.6︰1

4

Gain(Zenith)

3dB

±0.5 dB

5

Polarization

Vertical

6

Impedance

50 Ω

  2.2  Mechanical

      Form 2

  No.

Item

Specification

   1

Cable

2

Connector 

                                     SMA

3

Plastic Housing

Black

   3. Reliability
       Condition:Temperature: 40±5℃
           Load: DC=5V±0.5 V
           Quantity: 2000pcs
           Sustained Time: 480h

4. Environmental Specifications
       Condition:Post Environmental Tolerance (Refer to the form 1)
              Temperature Range 25±3℃
              Relative Humidity Range 55~75%RH
              Operating Temperature Range -40℃~+85℃
              Storage Temperature Range -40℃~+100℃

4.1  Moisture Proof
  The device should satisfy the electrical characteristics specified in form 1 after exposed to the temperature 40±2℃ and the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.
4.2   Vibration Resist
  The device should satisfy the electrical characteristics specified in form 1 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X, Y and Z directions.4.3  Drop Shock
  The device should satisfy the electrical characteristics specified in form 1 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.
4.4  High Temperature Endurance
  The device should satisfy the electrical characteristics specified in form 1 after exposed to temperature 80±5℃ for 24±2 hours and 1~2 hours recovery time under normal temperature.
4.5  Low Temperature Endurance
  The device should also satisfy the electrical characteristics specified in form 1 after exposed to the temperature -40℃±5℃ for 24±2 hours and to 2 hours recovery time under normal temperature.
4.6  Temperature Cycle Test
  The device should also satisfy the electrical characteristics specified in form 1 after exposed to the low temperature -25℃ and high temperature +85℃ for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.