VTGSMA-10

VTGSMA-10
Part Number:VTGSMA-10
Dimension:29*280mm
Mounting way:Magnet
Cables:RG 174 3m / 5m or others
Connectors:SMA / MMCX or others
Gain:5 dB
Frequency:824~896MHz / 1710~1990 MHz 880~960MHz / 1710~1990 MHz

 1.    Dimension(Unit:mm)
               

2.    Electrical Characteristics

2.1  GSM Antenna

Form 1

No.

Item

Specifications

Post Environmental Tolerance

1

Frequency(MHz)

824~896MHz / 1710~1990 MHz

880~960MHz / 1710~1990 MHz

±3 MHz

2

V.S.W.R(in BW)

≤2.0︰1

3

Gain(Zenith)

5 dB

±0.5 dB

4

Polarization

Vertical

5

Impedance

50 Ω

2.2  Mechanical

Form 2

No.

Item

Specification

1

Cable

RG 174  3m / 5m or others

2

Connector

SMA / MMCX or others

3

Plastic Housing

Black

4

Size

Φ29×280mm

 

3.    Reliability

       Condition:Temperature: 40±5℃

       Load: DC=5V±0.5 V

       Quantity: 2000pcs

      Sustained Time: 480h

 

4.    Environmental Specifications

      Condition:Post Environmental Tolerance (Refer to the form 1)

      Temperature Range 25±3℃

      Relative Humidity Range 55~75%RH

      Operating Temperature Range -40℃~+85℃

      Storage Temperature Range -40℃~+100℃

 

4.1  Moisture Proof

The device should satisfy the electrical characteristics specified in form 1 after exposed to the temperature 40±2℃ and the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.

4.2  Vibration Resist

The device should satisfy the electrical characteristics specified in form 1 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X, Y and Z directions.

4.3  Drop Shock

The device should satisfy the electrical characteristics specified in form 1 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.

4.4  High Temperature Endurance

The device should satisfy the electrical characteristics specified in form 1 after exposed to temperature 80±5℃ for 24±2 hours and 1~2 hours recovery time under normal temperature.

4.5  Low Temperature Endurance

The device should also satisfy the electrical characteristics specified in form 1 after exposed to the temperature -40℃±5℃ for 24±2 hours and to 2 hours recovery time under normal temperature.

4.6  Temperature Cycle Test

The device should also satisfy the electrical characteristics specified in form 1 after exposed to the low temperature -25℃ and high temperature +85℃ for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.